Have you ever woken up to find that your house feels like an ice box, or returned home from work only to find that your living room is like a sauna? If so, you know the importance of knowing where to turn during HVAC emergencies. The article below is intended to provide useful advice to homeowners everywhere who may find themselves in similar straits.
Check the whole house before you call for help. Find out which rooms are hot and which are cold. This information will help the contractor determine where the problem is and how to fix it.
By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. The power to the unit should be removed before you begin any maintenance, even cleaning. Take away all of the debris as well.
Make sure the equipment you are buying is ENERGY STAR compliant. It may seem a small thing, but it isn't. Products that are ENERGY STAR compliant can save you a lot of money in energy costs over the year. It can be over $100 easily, sometimes a lot more.
When the trees are losing their leaves, your HVAC unit can suffer. When you see nearby trees shedding their leaves, clean the fan grill on your unit constantly. Otherwise, the unit will have to work unnecessarily hard.
The correct HVAC system should have sealed air ducts to minimize heating or cooling loss as air travels to different rooms. The heating or cooling requirements of different rooms in the home should be taken into consideration. There is no reason to increase energy usage by controlling the temperature in rooms that are used very little.
If your evaporator coil, found inside your home, becomes dirty, your unit will lose efficiency. Just pop off the front panel of the furnace and check to see that the coil is dry. Using a brush attachment on a vacuum, gently clean the coil of any dust or other debris.
You should be sure to change the air filter of your HVAC system once every six months. Neglecting to do so can cause dust particles to clog the air ducts. In turn, your system will not work properly and you will find your bills going up. It's worth spending the time to clean the filters.
Keep your evaporator coil clean. A dirty coil will cause the unit to strain when cooling air. You can clean the coil yourself easily. Simply remove the front panel to expose the coil and use a soft brush attached to a vacuum to remove any dust and debris that has accumulated on the coil.
If you have known the frustration of an HVAC failure, you know that one of the best things you can do as a homeowner is acquaint yourself with a skilled contractor. However, knowing what to look for in an HVAC professional takes a bit of research and study. Use the advice found above, and you will always be prepared for anything.